Studio headphones: open-back, closed-back and what the specs mean
The difference between headphone types for tracking, mixing and reference listening, and what frequency response graphs tell you.
Short answer
Studio headphones fall into two categories: closed-back (sealed ear cups that isolate sound) for recording and tracking, and open-back (perforated ear cups that let sound pass through) for mixing and critical listening. The key difference is sound leakage and stereo image accuracy. For production work, avoid consumer-tuned headphones — their boosted bass and treble mislead every EQ and mix decision. A flat, accurate response is worth more than impressive-sounding playback. Budget: £80–£200 gets you reliable studio headphones at either type; beyond that, diminishing returns apply quickly.
Open-back vs. closed-back
Closed-back headphones have sealed ear cups that prevent sound from entering or leaving. They:
- Block external noise — useful in loud environments or when recording.
- Prevent headphone bleed — the click track or backing track does not leak into a microphone during overdubbing.
- Tend to have a stronger, punchier bass response — the sealed chamber amplifies low frequencies.
- Create a more "in-head" stereo image — sounds feel closer and more central.
Open-back headphones have perforated or mesh ear cups that allow air and sound to pass through. They:
- Allow sound to escape — audible to people nearby; unsuitable for recording when using a microphone.
- Have a more spacious, natural stereo image — the openness reduces the "in-head" effect and sounds more like listening to speakers in a room.
- Generally have a flatter, more accurate frequency response — less bass emphasis, cleaner highs.
- Allow ambient sound in — fine for mixing in a quiet room; impractical on public transport or noisy environments.
When to use each type
- Recording / tracking (vocalist or instrumentalist overdubbing): closed-back. The sealed design prevents the headphone mix from leaking into the microphone. Even a few dB of bleed can cause comb filtering on the recording.
- Mixing / critical listening: open-back preferred. The more accurate stereo image and flatter frequency response give a better representation of how the mix will sound on speakers.
- Mastering: open-back reference headphones or calibrated monitors. Mastering decisions require the most accurate reference possible.
- Commuting / casual listening: closed-back (or IEMs — in-ear monitors), which are not ideal for production but practical for transport.
- Late-night mixing when monitors are not usable: closed-back or open-back depending on whether anyone else is in the room. Either is acceptable; check the mix on monitors the next day.
Understanding the specifications
Headphone specifications can be confusing. The ones that matter:
- Impedance (Ω): the electrical resistance. 16–80Ω: easy to drive from a laptop, phone or interface. 150–600Ω: needs a dedicated headphone amplifier for full volume and clarity. Most audio interfaces drive up to 150Ω adequately.
- Sensitivity (dB SPL/mW): how loud the headphones get for a given amount of power. Higher sensitivity (100+ dB/mW) means louder output from low-power sources. Lower sensitivity requires more amplification. For interface use, sensitivity above 95 dB/mW is practical.
- Frequency response range (Hz): the stated range (e.g. 20 Hz–20 kHz) is almost meaningless as a spec because it says nothing about how flat the response is within that range. A headphone claiming "5 Hz–40 kHz" with severe colourations is worse for mixing than one claiming "20 Hz–20 kHz" with a genuinely flat response.
- Driver size (mm): larger drivers generally move more air and can produce better bass extension, but driver size alone does not determine quality. 40–50 mm is typical for full-size studio headphones.
- Weight and comfort: for extended mixing sessions (2–4 hours), comfort matters as much as sonic accuracy. Clamping force and ear cushion material significantly affect fatigue.
Frequency response and what to look for
The most useful information about a headphone's sound is its measured frequency response — a graph showing output level (dB) across the audible frequency range (20 Hz–20 kHz). Look for:
- Relative flatness: the goal is a response that does not dramatically boost or cut any frequency band. Some elevation in the 2–5 kHz "presence" region is normal and acceptable (the ear canal resonance naturally boosts this range when listening to speakers). Bass that rises significantly above the midrange indicates the headphone will make your mixes sound bass-light on speakers.
- Channel matching: the left and right drivers should measure closely. Large differences between channels will distort stereo positioning decisions.
- Harman target curve: Harman International's research into preferred headphone sound produced the Harman target curve — a measured ideal frequency response that most listeners find accurate and natural. Many reviewers compare measured responses to this target. It is a useful reference when evaluating frequency response graphs.
Independent measured data for hundreds of headphones is available at Rtings.com and Headphones.com's graph tool. The note-to-frequency tool lets you identify exactly which musical frequencies correspond to any Hz value on a frequency response graph.
Practical options at different budgets
Without naming specific products (which change frequently), reliable categories:
- Budget closed-back (£50–£100): the Sony MDR-7506 and Audio-Technica ATH-M40x are longstanding studio standards with measured flat responses and good isolation. Widely used in professional broadcast and studio settings despite low cost.
- Mid-range closed-back (£100–£200): the Beyerdynamic DT 770 Pro (80Ω version for interfaces) and Sennheiser HD 280 Pro offer improved bass extension and comfort for extended sessions.
- Budget open-back (£50–£150): the Sennheiser HD 400 series and Beyerdynamic DT 990 Pro are entry-level open-back options with notably better stereo imaging than closed-back alternatives at similar prices.
- Reference open-back (£150–£400): the Sennheiser HD 600, Beyerdynamic DT 880 Pro and Audio-Technica ATH-R70x are considered reference-grade for mixing and mastering at this tier.
For independent reviews with measured data, Rtings and Sound On Sound's gear reviews are reliable sources. The audio interface guide covers the output stage your headphones will connect to.
Next step
Headphones are only useful for production if the signal reaching them is clean and at the right level. The audio interface guide covers headphone output quality and impedance matching. Once you have a reliable monitoring setup, the EQ basics guide and mastering basics guide explain how to use what you hear to make production decisions. For deeper technical reading on headphone measurement and the Harman target, the AES publishes research papers on headphone perception and measurement standards.
Frequently asked questions
Consumer headphones (Beats, Sony consumer line, AirPods) are typically tuned for an enhanced listening experience — boosted bass, boosted high frequencies ("V-shaped" EQ curve) — which makes music sound impressive but is not accurate for production decisions. Studio headphones aim for a flatter, more accurate frequency response so that what you hear reflects what is actually in the recording. Making EQ and mix decisions on consumer headphones often leads to mixes that sound wrong on other systems.
Yes, with caveats. Headphone mixes differ from speaker mixes primarily in stereo image — on headphones, stereo is entirely inside the head (inter-aural), while on speakers the two channels interact in the room (inter-aural plus the acoustic space). This affects judgements about stereo width, depth and reverb. Many engineers use headphones as a reference alongside monitors rather than exclusively. Headphone-only mixing is common and produces commercial-quality results, but requires calibration listening on multiple systems (earbuds, car, phone speaker) to catch problems.
Impedance is measured in ohms (Ω) and indicates how much electrical resistance the headphones present to the audio source. Low-impedance headphones (16–50Ω) are easy to drive from phones, laptops and audio interfaces without a headphone amplifier. High-impedance headphones (150–600Ω) require more voltage to reach full volume and benefit from a dedicated headphone amplifier. For home studio use without a dedicated headphone amp, headphones at 32–80Ω are the practical range. Most audio interfaces drive headphones up to 150Ω adequately.
A flat frequency response means the headphones reproduce all frequencies at approximately equal levels — 100 Hz sounds at the same relative level as 1 kHz and 10 kHz. No headphone is perfectly flat, but studio headphones aim to minimise colouration. A frequency response graph (dB on the y-axis, Hz on the x-axis) shows the deviation from flat. Boosts or dips of more than 3–5 dB at particular frequencies indicate a colouration that will affect your production decisions. Sites like Rtings.com publish detailed measured frequency response graphs for hundreds of headphones.
For a complete home studio setup, having both types is useful but not essential for beginners. If you can only have one pair, the choice depends on your primary use: if you primarily record (overdubbing vocals or instruments), closed-back is more practical to prevent bleed. If you primarily mix and work in a quiet room, open-back gives a more accurate, spacious sound. Most engineers who work seriously with headphones have both types.